15 Dewalt Chainsaw Problems

Owning a chainsaw is a big responsibility. They can be dangerous if not used properly, so it’s important to be familiar with the saw you’re using and the correct way to use it. In this blog post, we will discuss some common Dewalt chainsaw problems and how to fix them. We’ll also provide tips on how to prevent these issues from happening in the first place. Stay safe out there!

There Is The List of 15 Dewalt Chainsaw Porblems

1. Trigger is stuck:

One of the most common problems with Dewalt chainsaws is that the trigger gets stuck. This can be caused by dirt or debris build-up in the saw, which prevents the trigger from moving freely. To fix this problem, simply clean out the saw with a brush or compressed air.

2. Chain comes off:

Another common issue is that the chain comes off while you’re using the saw. This can be caused by a loose chain, incorrect tension, or damage to the bar or sprocket. To fix this problem, first check to make sure that the chain is properly tensioned. If it’s not, adjust it according to the manufacturer’s instructions. Next, inspect the bar and sprocket for damage and replace them if necessary. Finally, make sure the chain is properly lubricated before using the saw again.

3. Dewalt chainsaw not starting:

There are a few reasons why your Dewalt chainsaw might not start. It could be out of fuel, the spark plug could be dirty, or the air filter could be clogged. To fix this problem, first check the fuel level and add more if needed. Next, clean the spark plug with a wire brush and replace it if necessary. Finally, check the air filter and clean or replace it if it’s dirty.

4. Saw runs rough:

If your Dewalt chainsaw is running rough, it could be because the carburetor needs to be adjusted. This is a relatively easy fix – simply turn the adjustment screws until the saw runs smoothly.

5. Saw is smoking:

If your Dewalt chainsaw is smoking, it could be because the oil or fuel mixture is too rich. To fix this problem, simply adjust the mix ratio according to the manufacturer’s instructions.

6. Chain is dull:

Over time, the chain on your Dewalt chainsaw will become dull and will need to be replaced. This is a fairly easy process – simply remove the old chain and install a new one. Be sure to match the size and type of chain to your saw model.

7. Bar is bent:

If the bar on your Dewalt chainsaw is bent, it will need to be replaced. This is a relatively easy process – simply remove the old bar and install a new one. Be sure to match the size and type of bar to your saw model.

8. Saw is leaking oil:

If your Dewalt chainsaw is leaking oil, it could be because the oil seal is damaged or the oil tank is overfilled. To fix this problem, first check the oil level and add more if needed. Next, inspect the oil seal for damage and replace it if necessary. Finally, make sure the oil tank is not overfilled.

9. Saw is vibrating:

If your Dewalt chainsaw is vibrating, it could be because the blade is unbalanced or the engine mounts are loose. To fix this problem, first check the blade for damage and replace it if necessary. Next, tighten the engine mounts. Finally, check the vibration dampeners and replace them if they’re worn out.

10. Saw won’t cut:

There are a few reasons why your Dewalt chainsaw might not cut properly. It could be because the chain is dull, the bar is bent, or the tension is too loose. To fix this problem, first sharpen or replace the chain. Next, check the bar for damage and replace it if necessary. Finally, adjust the chain tension according to the manufacturer’s instructions.

11. Engine stalls:

If your Dewalt chainsaw’s engine stalls, it could be because the air filter is dirty or the spark plug is fouled. To fix this problem, first clean or replace the air filter. Next, clean the spark plug with a wire brush and replace it if necessary. Finally, check the fuel mixture and adjust it if needed.

12. Saw is hard to start:

If your Dewalt chainsaw is hard to start, it could be because the spark plug is fouled or the carburetor needs to be adjusted. To fix this problem, first clean the spark plug with a wire brush and replace it if necessary. Next, adjust the carburetor according to the manufacturer’s instructions. Finally, make sure the fuel mixture is correct.

13. Saw runs hot:

If your Dewalt chainsaw runs hot, it could be because the spark plug is fouled or the fuel mixture is too rich. To fix this problem, first clean the spark plug with a wire brush and replace it if necessary. Next, adjust the carburetor according to the manufacturer’s instructions. Finally, make sure the fuel mixture is correct.

14. Saw idles high:

If your Dewalt chainsaw idles high, it could be because the carburetor needs to be adjusted. To fix this problem, simply turn the adjustment screws until the saw idles smoothly.

15. Saw stalls when throttle is applied:

If your Dewalt chainsaw stalls when you apply the throttle, it could be because the carburetor needs to be adjusted. To fix this problem, simply turn the adjustment screws until the saw runs smoothly.

How do you diagnose a chainsaw problem?

There are a few things you can do to diagnose chainsaw problems. First, check the oil and fuel mixture and adjust it if needed. Next, inspect the chain for damage and replace it if necessary. Finally, check the bar for damage and replace it if necessary. If these steps don’t fix the problem, then you may need to take your chainsaw to a professional for further diagnosis. Here you can also read about the Delta table saw problems.

Dewalt Chainsaw Safety Tips:

  1. Read the Owner’s Manual

Be sure to read the owner’s manual for your Dewalt chainsaw before using it. The manual will provide important information on how to use and maintain your saw, as well as safety precautions.

2. Wear Personal Protective Equipment

When using a Dewalt chainsaw, be sure to wear personal protective equipment (PPE) such as gloves, goggles, and ear protection. This will help protect you from kickback, debris, and noise.

3. Clear the Area

Before starting your Dewalt chainsaw, be sure to clear the area of any obstacles such as rocks, branches, or stumps. This will help prevent damage to the saw and injuries to yourself or others.

4. Inspect the Saw

Before each use, be sure to inspect your Dewalt chainsaw for any damage or wear. This includes checking the chain for sharpness and damage, as well as inspecting the bar for bends or cracks. If you find any damage, be sure to repair or replace the part before using the saw.

5. Start the Saw Correctly

To start your Dewalt chainsaw, first make sure the area is clear and there are no obstacles in front of the saw. Next, put on your PPE and check that the chain is tensioned correctly. Finally, hold the saw with both hands and pull the starter cord slowly until the engine starts.

6. Use the Saw Correctly

When using your Dewalt chainsaw, be sure to hold it correctly with both hands. The right hand should be on the rear handle and the left hand should be on the front handle. Be sure to keep your fingers and thumbs away from the cutting chain at all times.

7. Stop the Saw Correctly

To stop your Dewalt chainsaw, first release the throttle. Next, turn off the saw by moving the switch to the “Off” position. Finally, wait for the blade to stop before setting down the saw.

8. Store the Saw Safely

When not in use, be sure to store your Dewalt chainsaw in a safe and dry place out of reach of children or pets. Be sure to empty the fuel tank and clean the saw before storing it for long periods of time.

Conclusion:

Dewalt chainsaws are a great tool for a variety of tasks. However, it is important to be aware of the potential risks associated with their use. Be sure to read the owner’s manual and wear PPE when using your saw. Additionally, be sure to inspect the saw before each use and follow proper safety procedures when operating the saw. By following these tips, you can help ensure your safety and the longevity of your Dewalt chainsaw.

Back to top button