Dewalt Dw744 vs 745

Difference Between Dewalt Dw744 vs 745 in 2022

Having trouble deciding between these two Dewalt DW 744 and 745 table saws? This post is for you. We compared DW744 vs 745 Table Saws here. So stay with us and read about the interesting features of these Table saws.

After reading this guide you will easily understand which is best for you.

Difference Between Dw744 vs 745

The 744 is a little lighter than the 745. The Dewalt 745 generates 3,850 revolutions per minute, whereas the Dewalt 744 produces 3,650. The Dewalt DW745 has a maximum cutting depth of 3-1/8 inch at 90 degrees and 2-1/4 inch at 45 degrees, whereas the 744 has a maximum cutting depth of 31/8 inch at 0 degrees and 21/4 inch at 45 degrees. The 744 saw tilts from 45 to 90 degrees, while the 745 levels from 0 to 45 degrees.

Dewalt 745 Overview

Dewalt Dw745

This device can function for an extended period without a problem due to its 15A torque motor. It’s ideal for on-the-job applications and professional carpenters.

If properly maintained, this device may give years of trouble-free operation. With a 20-inch RIP capability, this device can easily cut through heavy hardwood material. Users will have little trouble cutting through larger sheets in a short amount of time.While, the high RIP capability will lower the cost per use for the user.

The tool’s ergonomic design makes it ideal for both experts and newcomers alike. This product will be easy to use for anyone with a passion for woodworking.

It’s incredibly simple to handle and transport.Then, the rear feet of the Dewalt dw745 is very easy to adjust and make it easier for the user to operate on an unsteady surface.

This feature allows you to use this product in any on-the-job situation when you don’t know what sort of location you’ll get. Because the blade can rotate 45 degrees and cut 2.25 inches deep, this device is ideal for modest to medium-sized jobs. Any user can produce at least a 3.13-inch cut when the blade is tilted at 90 degrees.

Related Article:  Dewalt 7485 VS Dewalt 7491RS  / Skilsaw SPTP99-11 vs SPTP99-12

Feature of Dewalt Dw745

A 10-inch blade

The carbide blade has 24 teeth and is 10 inches long. It is quite long-lasting. You may safely replace it as it erodes. If your economy allows, I recommend purchasing the original. Changing the blade may not necessitate the use of any tools. The sharpness slashes through a variety of hardwoods. It produces precise cuts that are smooth.

Depth of cut maximum

At 90 degrees, the Dewalt DW745 can cut to a maximum depth of 3-1/8 inches. Cutting depth is 2-and-a-quarter inches while operating at 45 degrees.

Capacity for Ripping

For difficult wood, the Dewalt DW745 has a 10-inch blade. You solve this problem by replacing a toothier one. That does not, however, imply that the machine can only operate with hardwood today. Because of the blade’s 45-degree slant, it can produce 2.25-inch deep cuts. It has a 90-degree tilting capability. A rip capacity of the fence system may reach 610mm.

The Angle Of The Blade

The front of the blade angle has a turning will. Range dw744 of 0 to 45 degrees. The miter gauge determines precise angle modifications.

The Motor Is Amplified.

The motor is 1850 Watts, which fits the robust structure. For materials, the motor has a 15 amp capacity. Hardwood or pressure-treated lumber is one of the materials used. The rotational speed is 3850 per minute. Projects are trimming faster and more cleanly as a result of this method.

Pushing A Button

Your hand is protecting from the blade by the push stick. It’s simple to take out and replace.

Minutes Of Rotation

The strong motor can turn at a rate of 3850 times per minute. For many types of wood, this is quick.

Fence Rails Made Of Pinion

The rack and pinion fence rails may adjusting, which makes the job easier. The process becomes more efficient, precise, and smooth. The rails may reducing in size. It goes well with the machine because the fences make it a small package.

Pros of dw745

  • Lightweight and compact
  • Adjustable and precise
  • Constructed to last
  • Capacity to rip
  • The cutting surface that is smooth

Cons of Dw745

  • The engine is making noise.
  • It is not compatible with a dado stack.
  • Cost

Why Should You Choose Dw745?

Professional carpenters and passionate DIYers who need to make correct cuts in a variety of wood species on a daily basis would appreciate the Dewalt DW745 table saw. With a weight of about 22kg, this model is meant to be small, robust, and simple to travel. So, this makes it suitable for people who work in many locations.

The DW745 from Dewalt is a strong and sturdy table saw that is more than capable of handling any small to medium-sized project. It’s also a highly popular tool on the market, with many consumers praising its power and mobility.

Dw744 Tablesaw Overview

Dewalt Dw744

The Dewalt 744 is a table saw with a standard 10-inch blade. You are permitting to use smaller saw blades. Crosscuts and straight cuts are easily cut with the 10-inch blade. Blades with a maximum cutting capability of 5,000 revolutions per minute come highly recommended.

Keep the saw blade parallel to the rip fence to avoid kickbacks. You alter the rail fence if it isn’t parallel.Then, feeding your material is done with a 6-inch broad push stick.

When using the Dewalt 744, the blade guard must be in position. Its table measures 191/4 x 261/2 inches. To the left and right, the miter angle is 30 degrees.Then, the bevel angle can be anything between 0 and 45 degrees. The blade is 10 inches long.

At 0 degrees, the maximum cutting depth is 3 1/8 inches, and at 45 degrees, it is 2 1/4 inches.While, the rotational speed in no-load mode is 3,650 revolutions per minute. Before operating the saw machine, you must adjust the rip scale.

The rip fence can find on either the left or right side of the road. After that, it’s simple to change the blade. When changing the saw blade, make sure it’s disconnecting. The power switch is controlled by a paddle on the On/Off switch. The padlock is inserted into a hole within the power switch to lock it. This prevents unauthorized people from using the computer.

Feature of Dw744

Collecting Dust

A dust cover and dust collecting port are included with the Dewalt 744. A vacuum can also be connected for effective dust collecting. It prevents clogging within the saw machine. Unplug the saw, flip it on its side, and open it to clean the dust extraction mechanism. Remove any extra dust and return it to the saw.

Blade protection

The blade guard shields your fingertips from the cutting edge of the blade. By removing the blade guard and adjusting shims, the blade and splitter must be aligned. The anti-kickback teeth can now operate thanks to the blade guard.


The Dewalt 744 comes with an easy-to-replace 10-inch blade. Raise the saw blade to its maximum height by rotating the blade height adjustment clockwise when replacing the blade. The arbor nut must removing and turned counterclockwise. Next, place the blade of the saw on the spindle. The arbor nut must be tightened with the teeth pointing down. Different kinds of blades produce cuts of various widths.

Miter gauge

It is a tool use to measure both sides of the miter gauge with adjustable stops at 90 and 45 degrees. Therefore, you may adjust the miter gauge by loosening the locknuts. You may also modify the stop plate by releasing the adjustment screws.

Ripcord fence

The rip barrier can be seen on both sides of the saw. The latches are attaching to the rails to secure the rip fence. It must be pushed down. The blade must remain parallel to the saw fence at all times. The saw fence is adjusted by unlocking the rail lock lever, loosening the hex bolts, and adjusting the saw fence. Return the rail lever to its original position and tighten the bolts.

Pros of Dw744

  • Safety
  • The blades are simple to replace.
  • Smooth beginnings
  • Versatile
  • Adjustable

Cons of Dw744

  • The motor is on the slow side.
  • The engine is emitting smoke.

Why should you choose Dw744?

This saw comes with ten-inch carbide blades with twenty-four teeth, a miter gauge, a foldable table saw stand and a push stick. Because the ease of use, the strong engine, and the affordability earned this model four out of five stars from customers. According to one customer, you simply need to set the guard once, and you’ll get consistent, accurate cuts every time you use it. Therefore, you won’t even need to measure the wood; instead, simply set the table to the size you want and go to work. When it comes to well-crafted and keyed-in outcomes, a decent saw is a must-have piece of equipment.


  • They’re both equipping with security measures.
  • They utilize blades that are 10 inches long.
  • Both of them are quite light.
  • They can be adjusted.


The two models have more similarities than differences. A thorough examination of the table saws will reveal your best choice.However, if you’re on a limited budget, the 744 is the way to go. It has a higher level of comfort than the rival. The Dewalt 745, on the other hand, is speedier than the 744. If you’re concerned about weight, the 744 is still the better option.So, the greatest table saw is one that fits your budget, room, and cut.

Leave a Comment

Your email address will not be published.