10 Dewalt Pole Saw Problems in 2022

Dewalt pole saws are a popular choice for homeowners and professionals alike because of their power and versatility. However, like any other piece of equipment, they can experience problems from time to time. In this blog post, we’ll take a look at 10 common Dewalt pole saw problems and how to fix them. Stay safe and have fun out there with your Dewalt!

List of the 10 Common Dewalt Pole Saw Problems:

  • Dewalt Pole Saw Stopped Working:
  • Dewalt Pole Saw Doesn’t Charge:
  • Dewalt Pole Saw is Leaking Oil:
  • Dewalt Pole Saw Won’t Start:
  • Dewalt Pole Saw Won’t Cut Deeply Enough:
  • Dewalt Pole Saw Damaged by Weather Conditions:
  • Dewalt Pole Saw Won’t Work with Certain Types of Wood:
  • Dewalt Pole Saw is Difficult to Operate:
  • Dewalt Pole Saw Blades are Wearing Down Too Fast:
  • Other Common Problems with a Dewalt pole saw, such as broken parts or electrical issues.

If you’re experiencing any of these common problems with your Dewalt pole saw, be sure to check out our comprehensive troubleshooting guide. With a little bit of elbow grease and some know-how, you should be able to get your saw up and running again in no time!

Dewalt Pole Saw

1. Dewalt Pole Saw Stopped Working:

If your Dewalt pole saw suddenly stops working, check to make sure that it is properly plugged in and that all of the battery connections are secure. If this doesn’t fix the issue, try resetting the saw by plugging it into a different outlet, or taking out and replacing any batteries that may be faulty.

2. Dewalt Pole Saw Doesn’t Charge:

A common cause of a Dewalt pole saw not charging properly is an old or damaged battery. Make sure that your battery is fully charged before trying to start up your saw, and consider investing in a replacement if you suspect that this could be the root of the problem.

3. Dewalt Pole Saw is Leaking Oil:

If you notice oil leaking from your Dewalt pole saw while it’s in use, there may be a problem with the oil reservoir or the seal. Check to make sure that all of the seals and hoses are securely attached, and keep an eye on your reservoir levels to prevent overfilling.

4. Dewalt Pole Saw Won’t Start:

If your Dewalt pole saw won’t start, try checking for any loose wires or damaged parts around the battery compartment. If you aren’t able to spot any issues, you may need to replace the battery entirely or take your saw into a repair shop for further inspection.

5. Dewalt Pole Saw Won’t Cut Deeply Enough:

If your Dewalt pole saw isn’t cutting deeply enough, you may need to sharpen the blade or adjust the cutting depth. Always follow the manufacturer’s instructions when attempting to make any changes to your saw.

6. Dewalt Pole Saw Damaged by Weather Conditions:

If your Dewalt pole saw is damaged by exposure to extreme weather conditions, such as high winds or heavy rain, it’s important to take it into a repair shop as soon as possible for inspection. Depending on the extent of the damage, you may need to replace some or all of the parts.

7. Dewalt Pole Saw Won’t Work with Certain Types of Wood:

Dewalt pole saws are designed to cut through softwoods like pine and fir, but they can have difficulty with harder woods such as oak or maple. If you’re trying to work with hardwood, consider using a different saw or upgrading your blade to improve your cut quality.

8. Dewalt Pole Saw is Difficult to Operate:

When operating a Dewalt pole saw, it’s important to always follow the manufacturer’s instructions and wear proper safety gear such as protective goggles, gloves, and hearing protection. Other potential causes of difficulty include issues with the chain tension or a dull blade.

9. Dewalt Pole Saw Blades are Wearing Down Too Fast:

If you notice that your blades are wearing down too quickly while using your Dewalt pole saw, there may be an issue with the tensioning system in the chain brake assembly. Take your saw into a repair shop to have this checked by an expert, and consider replacing the chain if it appears to be damaged or excessively worn.

10. Other Common Problems with a Dewalt Pole Saw, such as broken parts or electrical issues.

Regardless of what type of common problem you may be experiencing with your Dewalt pole saw, there are always steps that you can take to troubleshoot the issue and get your saw back up and running again as quickly as possible! Whether it’s a loose wire or a damaged part, our comprehensive troubleshooting guide will help point you in the right direction for getting your saw back to its best condition.

Related Posts: Ryobi Pole Saw Problems , Dewalt Flexvolt Miter Saw Problems , Makita Miter Saw Troubleshooting

6 Tips For Using Dewalt Pole Saw:

  1. Always make sure that you are wearing proper safety gear, such as goggles and gloves, while using your Dewalt pole saw.
  2. Be sure to keep the oil reservoir on your Dewalt pole saw filled to the proper level at all times.
  3. If you notice any issues with your blade or chain tensioning system, take your pole saw into a repair shop for expert diagnosis and repairs.
  4. If you’re working with hardwoods such as oak or maple, consider upgrading your blade for better cut quality.
  5. Consider investing in an extra battery if possible so that you can always have one fully charged and ready to go when needed!
  6. Make sure you fully read and understand the manufacturer’s instructions for your Dewalt pole saw before using it, as this will help ensure that you are operating the saw safely and effectively.

How to protect you can protect your Dewalt Pole Saw?

Protecting your Dewalt Pole Saw is extremely important, as this will ensure that it maintains its quality and functionality over time. Here are a few tips to help you protect your saw:

  1. Always store your Dewalt pole saw in a dry place when not in use, such as inside a shed or garage.
  2. Avoid dropping or banging your pole saw against hard surfaces, as this can damage the chain and other internal components of the tool.
  3. Keep the chain well-lubricated at all times using high-quality oil for optimal performance and durability of the blade.
  4. Regularly clean off any debris or gunk that may build up on the outside of your pole saw after use, such as sap or dirt.
  5. Inspect your Dewalt pole saw regularly for any signs of wear or damage, and take it into a repair shop if needed.

Related FAQs:

Which is better electric pole saw or gas pole saw?

If you’re looking for a saw that is more powerful and can handle tougher cuts, then a gas pole saw may be the better option for you. However, if you prefer a saw that is lighter weight and easier to operate, then an electric pole saw may be the better choice. Ultimately, the choice between electric and gas pole saws comes down to personal preference.

Does Dewalt make a cordless pole saw?

Yes, Dewalt does make a cordless pole saw! The company’s DCS690X2 is a battery-powered 8-inch pole saw that features an adjustable telescoping shaft for increased versatility, as well as a brushless motor for optimized performance. Whether you’re trimming trees or pruning branches in your yard, the Dewalt cordless pole saw is a great option to consider.

Why did my dewalt Pole Saw stop working?

Some of the most common causes include a damaged battery, clogged air filter, dirty spark plug, or worn-out drive belt. Before troubleshooting these issues yourself, it’s important to consult with an expert or take your saw into a repair shop to have it professionally diagnosed and fixed. Otherwise, you run the risk of further damaging the saw and making the issue worse.

Conclusion:

With these handy tips and tricks, you can troubleshoot your Dewalt pole saw and get it back up and running again in no time! Whether your saw is having issues with the blade or chain tensioning system, be sure to keep our guide handy as a reference point for getting your saw fixed quickly and efficiently.‚Äč

Back to top button