15 Common Excalibur Scroll Saw Problems in 2022

Scroll saws are a great investment for anyone who wants to start working with wood. They’re relatively affordable, and they make it possible to cut out more intricate designs than you could with a power saw. However, if you’re not careful, you can run into some problems with your scroll saw. In this blog post, we’ll discuss some of the most common Excalibur scroll saw problems and how to fix them. Stay safe out there!

List of The 15 Common Excalibur Scroll Saw Problems:

  • Excalibur scroll saw not turning on
  • Excalibur scroll saw not working
  • Excalibur scroll saw not cutting
  • Excalibur scroll saw not cutting straight
  • Excalibur scroll saw not cutting cleanly
  • Excalibur scroll saw skipping
  • Excalibur scroll saw blade coming loose
  • Excalibur scroll saw motor overheating
  • Excalibur scroll saw smoking
  • Excalibur scroll saw vibration
  • Excalibur scroll saw making burning smell
  • Excalibur scroll saw noise
  • Excalibur scroll saw table not level
  • Excalibur scroll saw table level problem
  • Excalibur scroll saw teeth not sharp
  • Excalibur scroll saw dust collection not working

1. Excalibur scroll saw not turning on:

If your Excalibur scroll saw isn’t turning on, the first thing you should check is the power cord. Make sure it’s plugged into an outlet and that the outlet is working. If the cord is plugged in and the outlet is working, but the Excalibur scroll saw still won’t turn on, there may be a problem with the scroll saw itself. Check to see if there’s a switch on the Excalibur scroll saw that needs to be turned on. If there is, make sure it’s in the “on” position. If there’s no switch or the switch is already in the “on” position, you may need to call a repairman to take a look at your scroll saw.

2. Excalibur scroll saw not working:

If your Excalibur scroll saw is plugged in and turned on, but it’s not working, there may be a problem with the blade. First, check to see if the blade is installed properly. If it’s not, follow the instructions in the manual to install it correctly. If the blade is installed properly but the saw still isn’t working, try replacing the blade with a new one. If that doesn’t work, there may be a more serious problem with the scroll saw itself and you’ll need to call a repairman.

Excalibur Scroll Saw Cutting

3. Excalibur scroll saw not cutting:

There are several things that can cause an Excalibur scroll saw to stop cutting. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. If the blade is installed properly but the saw still isn’t cutting, try replacing the blade with a new one. It’s also possible that the scroll saw is not set to the correct speed for the type of material you’re trying to cut. Check the manual to find the correct speed setting for your material and adjust accordingly. Finally, make sure that the table is level. If it’s not, the blade will not be able to cut through the material evenly and you’ll end up with a bad cut.

4. Excalibur scroll saw not cutting straight:

There are several things that can cause an Excalibur scroll saw to cut crooked. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. If the blade is installed properly but the saw is still cutting crooked, there are a few things you can try to fix it. First, adjust the tension on the blade. If the tension is too loose, the blade will vibrate and cause the saw to cut crooked. Second, make sure that the table is level. If it’s not, the blade will not be able to cut through the material evenly and you’ll end up with a bad cut. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in a crooked cut.

5. Excalibur scroll saw not cutting cleanly:

There are several things that can cause an Excalibur scroll saw to cut uncleanly. First, check the blade to see if it’s dull or damaged. If it is, replace it with a new one. Second, make sure that the scroll saw is set to the correct speed for the type of material you’re trying to cut. If it’s not, the blade will tear through the material instead of cutting it cleanly. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in an unclean cut.

6. Excalibur scroll saw skipping:

If the  Excalibur scroll saw is skipping, it’s likely because the blade is dull or damaged. First, check the blade to see if it’s dull or damaged. If it is, replace it with a new one. If the blade is in good condition but the saw is still skipping, there are a few things you can try to fix it. First, adjust the tension on the blade. If the tension is too loose, the blade will vibrate and cause the saw to skip. Second, make sure that the table is level. If it’s not, the blade will not be able to cut through the material evenly and you’ll end up with a bad cut. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in the saw skipping.

7. Excalibur scroll saw blade coming loose:

There are several things that can cause an Excalibur scroll saw blade to come loose. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. If the blade is installed properly but it’s still coming loose, try tightening the tension on the blade. If that doesn’t work, there may be a more serious problem with the scroll saw itself and you’ll need to call a repairman.

8. Excalibur scroll saw motor overheating problem:

If the  Excalibur scroll saw motor is overheating, it’s likely because it’s not getting enough air flow. First, check to see if there’s anything blocking the vents on the scroll saw. If there is, remove it and see if that fixes the problem. If not, try moving the scroll saw to a different location where there’s more airflow. Finally, if the problem persists, you may need to call a repairman.

9. Excalibur scroll saw smoking:

If your Excalibur scroll saw is smoking, it’s likely because something is wrong with the motor. First, check to see if there’s anything blocking the vents on the scroll saw. If there is, remove it and see if that fixes the problem. If not, try moving the scroll saw to a different location where there’s more airflow. Finally, if the problem persists, you may need to call a repairman.

10. Excalibur scroll saw vibration:

Excalibur scroll saw vibration can be caused by several things. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. Second, make sure that the table is level. If it’s not, the blade will vibrate and cause the saw to vibrate. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in vibration.

11. Excalibur scroll saw making burning smell:

If your Excalibur scroll saw is making a burning smell, it’s likely because the motor is overheating. First, check to see if there’s anything blocking the vents on the scroll saw. If there is, remove it and see if that fixes the problem. If not, try moving the scroll saw to a different location where there’s more airflow. Finally, if the problem persists, you may need to call a repairman.

12. Excalibur scroll saw noise:

Excalibur scroll saw noise can be caused by several things. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. Second, make sure that the table is level. If it’s not, the blade will vibrate and cause the saw to make noise. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in noise.

13. Excalibur scroll saw table level problem:

If the  Excalibur scroll saw table is not level, it will cause the blade to vibrate and the saw to skip. First, check to see if the legs of the scroll saw are level. If they’re not, adjust them until they are. Second, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in the saw skipping. Finally, if the problem persists, you may need to call a repairman.

14. Excalibur scroll saw teeth not sharp:

If the teeth on your Excalibur scroll saw are not sharp, it will cause the saw to skip. First, check to see if the blade is installed correctly. If it’s not, follow the instructions in the manual to install it correctly. Second, make sure that the table is level. If it’s not, the blade will vibrate and cause the saw to skip. Finally, check the alignment of the fence. If it’s not aligned properly, it will cause the blade to cut at an angle, resulting in the saw skipping.

15. Excalibur scroll saw dust collection not working:

If the dust collection on your Excalibur scroll saw is not working, it’s likely because something is blocking the hose. First, check to see if there’s anything blocking the hose. If there is, remove it and see if that fixes the problem. If not, try moving the scroll saw to a different location where there’s more airflow. Finally, if the problem persists, you may need to call a repairman.

You can also read about the Ryobi Pole Saw Problems , Dewalt Scroll Saw Problems , Delta table saw problems ,

7 Tips To Use The Excalibur Scroll Saw Properly:

  1. Always use a sharp blade for better results and less vibration.
  2. Be very careful when changing the blade as the teeth are extremely sharp.
  3. Make sure the table is level before beginning a project to avoid skip cuts.
  4. Check the alignment of the fence before each project to ensure straight cuts.
  5. Use the dust collection system to keep the area clean and free of sawdust.
  6. Follow the instructions in the manual carefully to avoid any problems.
  7. If you have any trouble, call a repairman for assistance.

Related FAQs:

How do I use an Excalibur scroll saw?

To use an Excalibur scroll saw, first make sure that the blade is installed correctly. Next, check to see that the table is level. If it’s not, adjust the legs until it is. Finally, align the fence so that it’s perpendicular to the blade.

How do I change the blade on an Excalibur scroll saw?

To change the blade on an Excalibur scroll saw, first disconnect the power. Next, use the Allen wrench to loosen the blade clamp screw. Carefully remove the old blade and install the new blade. Finally, tighten the blade clamp screw and reconnect the power.

What are some common problems with Excalibur scroll saws?

Some common problems with Excalibur scroll saws include the blade not being installed correctly, the table not being level, and the fence not being aligned properly. If you’re having trouble with your scroll saw, try troubleshooting these common problems first.

Conclusion:

Excalibur scroll saws are a great tool for anyone who wants to do precision woodworking. However, like any tool, they can have their share of problems. The most common problems include the blade not being installed correctly, the table not being level, and the fence not being aligned properly. If you’re having trouble with your scroll saw, try troubleshooting these common Excalibur scroll saw problems first. With a little bit of care and patience, you should be able to get your Excalibur scroll saw working properly in no time.

Back to top button