How To Cut Thick Wood With Circular Saw? – Right Way

If you want to cut wood thicker than the blade of a circular saw, it will be an arduous task. But, you don’t have to worry; because this post will assist you to know how to cut thick wood with circular saw.

A circular saw is an instrument for cutting many materials such as wood, masonry or plastic. Without any doubt, a circular saw is one of the most powerful tools, especially for woodworking. Everyone can effectively use a circular saw for a wide range of projects.  

Required  Tools For Cutting Thick Wood With A Circular Saw

  1. Circular Saw 
  2. A marker for marking 
  3. Clamps 
  4. A Square 
  5. A Safety Gear 
  6. Tape for measurement 

4 Step Easy Guide On How To Cut Thick Wood With Circular Saw

You might have gathered all the necessary tools. So let’s start the process. 

Step 01: Select The Appropriate Saw 

Choosing an appropriate circular saw is very crucial to be able to rip via thick wood accurately.  

So, according to your dominant hand, select a saw that is right-handed or left-handed. We suggest keeping your non-dominant hand on the backup handle for more stability. The dominant hand must be near the trigger or power button.  

If you don’t have any plug station near your workplace, then you can use Battery-powered saws. These battery-powered saws don’t need a power station because they use a battery.  

Moreover, before going into the live-action, ensure where the saw has its power button and other handles. The footplate must be kept on wood so that it can offer more stability during the cutting process.  

Step 02: Measure The Blade And The Wood Thickness Accurately

Take a pencil or marker to measure according to which you are going to cut your wood. This is very important to get a perfect rip and also to avoid destruction.  

Let’s suppose that the blade’s exposed size is 5 inches, then you will be able to rip a maximum of 10 inches thick wood. Otherwise, it will be challenging for a circular saw to rip the material, which is more than 10 inches.  

 Don’t worry; there is a wide range of blade sizes and circular saws available in the market. So, if the length of the blade and wood is not the same, change the blade which suits the wood thickness.  

Furthermore, you also need to keep the saw in line with markings during the cutting process. This means if your measurements go wrong, your cutting will be defective. Besides, you need to use proper saw guides, which contain a speed square.  

Step 03: Put The Wood Onto The Stand

Once you have done all the steps mentioned above, you can start with the cutting process. First, place the thick wood onto the stand. But remember that the stand size is depending on the wood you want to rip.  

Moreover, you have to place the wood so that the part you wanted to rip must be at the last part of the stand.  

Step 04: Start To Rip The Thick Wood With Circular Saw

The thick wood ripping process with the circular saw begins from one side of the measured line and doesn’t push the circular saw forward to rip. All you need to do is to hold the wood with a left hand and the saw plate mounting against it, so rip through as huge as you can.  

Afterwards, turn around the wood and rip the other marked line after one side before being completed. Then, repeat this process for all sides. Besides, it is vital to use a sharp blade to do the cutting process.  

Moreover, you also need to keep your hands at a decent distance from the saw’s base-plate for safety measures. Finally, make sure that saw is unplugged when you don’t need to rip.  

Lastly, there will be some dust during the wood cutting process with a circular saw, so we suggest wearing a goggle and mask before the cutting process.  

Some Safety Tips For Cutting The Thick Wood With Circular Saw

  • Use a goggle or mask before starting the process because it generates a lot of dust. 
  • Make sure that the blade is sharp enough for cutting thick wood 
  • Blade-locking nut should be tightened properly 
  • Keep your hands at a reasonable distance from the blade 
  • Never force the saw forward to rip 
  • Before starting the ripping process, always run the circular saw in an empty space to check if it is working correctly or not.  

Final Thoughts

We are sure that everything about cutting thick wood with a circular saw is now cleared to you. Since the dense wood is quite difficult to handle as compared to its thinker counterparts. However, our proper guidance and information will help you cut and use thick wood on your own.  

Back to top button